Poll Worker Checklist

VxScan Setup

Setup the ballot box:

• open the velcro on the top and bottom of each side

• pull the box open (unlock or remove seal as necessary)

• using the yellow strap, lay the bottom down

• latch the side to the bottom

• pull the other yellow strap to bring the locking arm down

• pull the top up

• secure the top by pushing the locking arm back up

• check the top surface to ensure that the side panels are properly interfacing with the top panel

• seal or lock the ballot bin as required

Setup the scanner:

• place the case on top of the ballot box by (1) lining up the case bracket with the bracket holes on the ballot box and (2) pushing the case back to secure in place

• latch the case to the ballot box from the backside of the case

• remove and document the scanner case seal(s)

• push the button to release and open each latch and open the lid

• remove the power cord from it's storage place

• plug the power cord into the case

• plug the power cord into an outlet

Open Polls

• open the interior panel and insert Poll Worker Card into VxScan

• select Yes, Open the Polls

• insert a piece of thermal printer into the back of the printer

• one copy of the Polls Opened Report will print

• select Print Additional Polls Opened Report to print more

• verify precinct name, election date, and totals are zero

• retain and/or display the Polls Opened Report as instructed by your election administrator

• remove the Poll Worker Card

• close the interior panel

• seal and document the interior panel as required

Assisting Voters

Helping a voter cast their ballot at VxScan

• instruct the voter to insert their ballot in any orientation

• if ballot scans successfully, let the voter know their vote has been cast

• if ballot does not scan successfully, help the voter understand the issues with their ballot specified on the screen. Explain their options which, could include casting their ballot as marked, adding marks to their ballot, or receiving a new ballot

Close Polls

• unseal and document the interior panel seal as required

• open interior panel and insert Poll Worker Card into VxScan

• select Yes, Close the Polls

• insert a piece of thermal printer into the back of the printer

• one copy of the Polls Closed Report will print

• select Print Additional Polls Closed Report to print more

• retain and/or display the Polls Closed Report as instructed by your election administrator

• remove the Poll Worker Card

Packing Up VxScan

Pack up the scanner:

• insert the Poll Worker card snd select Power Down to turn VxScan off

• remove the USB drive from the interior panel and secure as required

• remove the power cord from the case

• remove the power cord from the outlet

• insert the power cord into it's storage place

• close the case lid

• seal and document the case as required

• remove the case from the ballot box by lifting and unhooking the latch on the back of the case

• pull the case forward and lift the case off of the ballot box

Pack up the ballot box:

• unseal and/or unlock the ballot box

• remove all ballots from the ballot box and seal into a secure container, recording the seal number as required

• push the locking arm down

• push the top down

• push the locking arm back up

• unlatch the bottom from the side

• using the yellow strap, pull the bottom up

• close the box

• velcro the top and bottom of each side