Packing Up VxMark

Pack up VxMark through the following steps:

1. Unplug and store printer:

   • press the power button to turn the printer off

   • unplug the power cord from the outlet

   • unplug the power cord from the back of the printer

   • unplug the printer cable

   • place the printer in the case

   • place the power cord on top of the printer

   • zip the top closed

2. Store the components:

• remove the privacy screen and place behind the foam

• remove the headphones (b) from the accessible controller (a), place them in the travel pouch, and place them on to of the screen

• put the accessible controller (a) in the front-left compartment

• unplug the power cord (c) from the outlet and put in the back-left compartment

• put the printer cable (d) in the mid-right compartment

• press and hold for 1 second the power button to turn the VxMark off (button on the mid-right side of the screen)

3. Close the case and seal:

• secure all four latches

• seal in one of the two locations highlighted with a square in the picture below

• record the seal number

Record the seal number on the Equipment Seals Log and store or return the equipment according to your election administrator's directions.