VxCentralScan Hardware Setup

Hardware Overview

VxCentralScan is a commercial off-the-shelf (COTS) laptop pre-installed with VxCentralScan software pre-installed and a Fujitsu scanner stored in tan cases.

VxCentralScan Setup

VxCentralScan can be set up through the following steps:

1. Unbox and Setup Scanner:

   • remove the scanner and power cord from the case

   • attach and pull out the paper feed guide tray (a)

   • pull out the paper holder tray (b)

   • plug the USB cord (c) into the back of the scanner and into the laptop

   • plug the power cord (d) into the back of the scanner and into an outlet

   • press the power button (e) to turn the scanner on

2. Setup VxCentralScan laptop:

• open the case by lifting the latches on front

• prepare the components:

  • remove the laptop

  • pull the power cord (a) out and plug into the laptop and an outlet

  • pull the USB hub (b) out and plug into the laptop

  • pull the card reader (c) out and plug into the USB hub (b)

  • pull the scanner cord (d) out and plug into the scanner

  • turn the laptop on

VxCentralScan hardware setup is complete.