The following steps must be completed by an election manager.
Before you configure VxMark, you must set up the machine. Follow VxMark Hardware Setup steps.
To configure VxMark, you must do two things in VxAdmin:
Save the election package to a USB drive.
The smart card reader is beneath the accessible controller. The USB port is accessible at the ballot box attachment point. The ballot box must be removed to insert a USB drive. Seal and document the ballot box as required.
An unconfigured machine will prompt you to insert an election manager card to log in and then a USB drive with the election package saved from VxAdmin to configure.
After the USB drive is inserted, VxMark will automatically begin loading all ballot styles for the election. After the election package is done loading, the election manager menu screen will appear and VxMark will be in test ballot mode.
Use the toggle button to switch between Test Ballot Mode and Official Ballot Mode. The machine must be in official ballot mode on election day. Review the L&A Overview instructions to understand which mode to use during logic and accuracy testing.
To remove election configuration (and all data) from VxMark:
You can now re-configure VxMark with a different election package.
